Kalakrti Design Studio
Book a slot

CNC carving · PU finishing · Fixed prices

Indian pattern, carved to the millimetre.

Mandala walls, mandir backdrops and handles cut from the same patterns. We carve on our own CNC, spray in our own PU booth, and every price is fixed before you book.

Shop handles Book a CNC slot · ₹1,000
Split mandala · 6 panels · 2 × 3 ft each
In-house CNC
3-axis router, 8 × 4 ft bed
In-house PU booth
Matte, high gloss and metallic
Fixed rate card
Board by the 8 × 4 sheet, carving by sq ft
₹1,000 books a slot
Adjusted in your final bill

Collections

Carved walls, finished in your shade.

Each piece is cut from 18 to 25 mm board on our CNC, then primed and sprayed in PU. Pick a size and a finish. The price shown is the price you pay, plus GST.

3D model of the Venkateswara Swamy backdrop: black PU idol in a carved arch with Lakshmi, shankha and chakra in gold
Signature · made to order

Venkateswara Swamy Backdrop

Sri Venkateswara in full 3D relief inside a carved arch, with Lakshmi, shankha and chakra in gold. Our PU team spends fifteen days on the mirror-black finish.

HDHMR · 3D relief · made to your pooja wall

On quote

Doors and rafters

Carved doors, fluted walls.

Door skins carved in 3D on HDHMR and cut to your frame, and rafter sheets cut from full 8 × 4 ft sheets. Prices are before packing and GST.

Doors

Rafter sheets

Door prices are for one 3 × 7 ft skin in 18 mm HDHMR. Rafter prices are worked from our rate card for a full 8 × 4 ft sheet.

3D studio

Turn it in your hand.

Drag to rotate. Pick a piece, a PU shade and a sheen, and see how light falls into the carving before you order.

Drag to rotate

Venkateswara Swamy

Piece
PU shade ·
Sheen

Handles

Handles that match the wall.

Cut from the same patterns as our panels and sprayed in the same PU shades, so a wardrobe can match the mandala wall beside it. Standard hole centres, so they fit any shutter.

Teak or HDHMR, carved on one face and PU finished. Prices are per piece, plus GST. Screws included.

Book a CNC

Your design, our machine, a fixed price.

Bring a DXF, a sketch or a photo. Enter the size in millimetres and you see the full price before you book. ₹1,000 reserves your machine slot and is adjusted in the final bill.

  1. Size itEnter the job and see the price.
  2. Book the slotPay ₹1,000 to reserve machine time.
  3. Approve the previewWe send the toolpath preview before cutting.
  4. Pay and collectPay the balance. Collect, or we deliver.

Job card

Example loaded: an 8 × 8 ft jaali wall on two sheets
ft
in
ft
in
pcs

Enter the size in feet and inches. Boards come in 8 × 4 ft sheets, so you pay for the full sheets your design uses. 50 mm is two 25 mm boards pressed together. 3D relief needs 12 mm or thicker. Acrylic is cut raw, without PU.

Reserve your machine slot

Send the job with your file. We check the file, confirm your date and send a ₹1,000 payment link to your phone.

DXF, SVG, PDF, AI, CDR or a clear photo.

Rate card

Board is charged by the full 8 × 4 ft sheet, so an 8 × 8 ft design uses two sheets. CNC carving and PU are charged on the design area; PU counts 1.5 times the area for 2D work and 2.5 times for 3D relief, because carved faces take more coats. Packing is 5% of the bill, and GST 18% is added on top.

Board price per 8 × 4 ft sheet
* 50 mm is two 25 mm sheets pressed together, plus ₹1,000 pressing per sheet.

CNC carving, per sq ft

PU finish, per sq ft

Other charges

What our machine does

Machine
3-axis CNC router
Largest piece
One 8 × 4 ft sheet. Bigger work is carved as panels and joined on site.
Board thickness
3 to 25 mm, or 50 mm as two 25 mm boards pressed together
Finest detail
⅛ in (3 mm), set by our smallest bit
3D relief
One face only, on 12 mm board or thicker. No undercuts.
Billing
Board by the full sheet. Carving and PU by area, minimum 1 sq ft per piece.
Our mark, as we would cut it in 8 mm acrylic.

Atelier

कलाकृति

Kalakrti means a work of art. We are a design studio with our own CNC router and PU spray booth under one roof, so the piece that leaves the machine reaches your wall finished.

From pattern to wall

  1. PatternWe draw it, or clean your file into vectors.
  2. ToolpathBits, depths and passes set for your board.
  3. CarveCut on our 3-axis CNC router.
  4. Sand and sealEdges hand-sanded, board sealed.
  5. PU sprayPrimer and top coat in our spray booth.
  6. Cure and packChecked against the drawing, packed in foam.

For architects and interior designers

  • Trade pricing on the same fixed rate card
  • Shade and board sample kit, ₹750, adjusted on your first order
  • Your client patterns stay yours. We never sell them in the shop.